LED spot curing system is mainly used for UV glue, ink, varnish, paint, coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. LED spot curing light application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、LED lamp beads
LED Spot UV Curing Systems has the advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UV LED Spot Curing System without heat radiation
LED spot curing system from Futansi using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
UV-LED Spot Curing System from Futansi, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
UVLED spot curing system through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV curing spot light from Futansi does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UVLED line light source curing machine can be used for UV glue, ink, varnish, paint, coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED lamp beads
Advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
Using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a UVLED light source equipment, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy & mdash; & mdash; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
Does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UVLED Area Curing Systems can be used for UV glue, ink, varnish, paint, coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED lamp beads
Advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
Using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a UVLED light source equipment, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy & mdash; & mdash; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
Does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UV oven can be used for UV glue, ink, varnish, paint, coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. UV curing LED oven chamber application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

1. Energy Efficiency: LED UV ovens consume less energy compared to traditional UV curing systems, making them more environmentally friendly and cost-effective to operate.
2. Instant On/Off: LED UV lamps can be turned on and off instantly, eliminating the warm-up and cool-down times associated with traditional UV lamps. This feature helps to increase productivity and reduce downtime.
3. Longevity: LED UV lamps have a longer lifespan than traditional UV lamps, reducing maintenance costs and downtime for lamp replacement.
4. Cooler Operation: LED UV lamps emit less heat compared to traditional UV lamps, which can be beneficial for heat-sensitive substrates and materials.
5. Precise Control: LED UV ovens offer precise control over curing parameters such as intensity and exposure time, allowing for consistent and repeatable curing results.
6. Environmentally Friendly: LED UV curing systems typically do not emit ozone or mercury, making them safer for the environment and workplace.
7. Versatility: LED UV ovens can be used for curing a wide range of materials, including inks, coatings, adhesives, and encapsulants, on various substrates such as paper, plastic, glass, and metal.
8. Compact Design: LED UV ovens often have a more compact footprint compared to traditional UV curing systems, making them suitable for installations where space is limited.

Futansi uv curing conveyor systems can be used for UV glue, ink, varnish, paint, coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、High quality LED lamp beads
With the advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of UV light curing conveyor is 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
UV curing conveyors using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a UV Curing Systems, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Desktop conveyor UV curing systems through the led chip for electrical energy & mdash; & mdash; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV conveyor Belt conVey LED does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing conveyor covers an area far less than the traditional UV mercury lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UV Enlengthing Conveyor Curing Machines emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi conveyor systems can be used for UV glue, ink, varnish, paint, coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、High quality LED lamp beads
Advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of UV curing conveyor system is 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
UV light-curing conveyors using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a Belt conveyor UV curing systems, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
UV curing conveyor systems through the led chip for electrical energy & mdash; & mdash; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
Ultra light UV conveyor does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV floor curing equipment covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UV-LED curing conveyor emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UVLED curing oven can be used for UV adhesive, IUV ink, UV varnish, UV paint, UV coating and other photosensitive materials curing role, so that its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of LED UV curing oven such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
Cool cure UV LED chamber common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, LED UV Curing Chambers with low heat radiation
LED UV curing box using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a UVLED light source equipment, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED curing cabinet can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED light does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UVLED Area Curing Systems can be used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other photosensitive materials cure, so its surface glossy and bright, with good weather resistance, water resistance, friction resistance, acid and alkali resistance and other high-intensity protection role. led uv light source application areas are wide, suitable for ink printing, industrial products fixed, specific applications can be referred to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of UV LED curing equipment such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV curing surface light source common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
LED UV systems using high power LED beads, emitting 365/385/395/405nm single-wavelength UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a LED UV curing systems, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy & mdash; & mdash; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV curing systems do not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV-Light Curing Systems cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, UV LED Curing Systems use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;