Futansi UV curing spot light is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV led light source application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

Industrial Manufacturing: UV spot curing system are widely used for curing, bonding and surface treatment in industrial manufacturing processes. For example, in the process of encapsulation and protection of electronic components, led spot curing system can quickly cure the glue, improve production efficiency and product quality.

Printing industry: UV spot curing system is widely used in the printing industry, especially in the curing process of UV ink. It can provide high-quality printing effect and fast drying, suitable for high-speed printing.

Medical field: In the medical field, UV spot curing system is used for disinfection and sterilisation. It can effectively kill bacteria and viruses and provide a sterile environment. In addition, UV spot curing system is also used in phototherapy and dermatological treatment, with significant therapeutic effects.

Scientific research experiment: In scientific research experiments, UV spot curing system is used for photochemical reaction and spectral analysis. It can provide a stable UV light source to ensure the accuracy and repeatability of the experimental results.

Water treatment: UV spot curing system is used for sterilisation and disinfection in water treatment process. It can effectively remove bacteria and viruses in water and provide safe drinking water.

Energy efficient: UV LED spot curing system are several times more energy efficient than traditional mercury lamps, producing high intensity UV light at lower power consumption. This not only reduces energy consumption, but also reduces operating costs.

Environmentally friendly and non-polluting: UV spot systems does not contain mercury and other harmful substances, and will not produce harmful gases and wastewater, in line with environmental requirements. In addition, the disposal of UV curing systems is easier and safer.

Long life: LED spot curing light’s service life is usually more than tens of thousands of hours, far more than traditional mercury lamps. This reduces replacement frequency and maintenance costs, and improves equipment reliability and stability.

Fast start-up: UV spot cure systems are able to reach full power output instantly without warm-up time. This is especially important for applications that require a quick response, such as industrial production lines and medical equipment.

Precise control: The output intensity and wavelength of UV spot curing systems can be precisely adjusted by electronic control to suit different application requirements. This flexibility allows it to excel in a variety of complex applications.

Futansi LED spot curing system is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV curing spot light application areas are wide, mostly used in glue curing, ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、High quality LED beads
Advantages such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV Spot Systems common output of 365nm, 365HP, 385nm, 395nm, 405nm, low thermal radiation;

3, UV LED Curing without heat radiation
365nm UV LED spot light using high power LED beads, emitting 365/385/395/405nm single-wavelength UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with Spot UV irradiation systems, according to the actual use of the situation, choose 1-8 irradiation head alone or synchronous work, it’s cost effective;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, UV Curing System can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UVA high powered LED spot cure system does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV light-curing equipment cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
LED curing solutions through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UV curing spot light is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV led light source application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi spot curing system is mainly used for UV glue, ink, varnish, paint, coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV curing spot light application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、LED lamp beads
LED Spot UV Curing Systems has the advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UV LED Spot Curing System without heat radiation
LED spot curing system from Futansi using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
UV-LED Spot Curing System from Futansi, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
UVLED spot curing system through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV curing spot light from Futansi does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

525nm green light LED spotlight UV system utilizes the specific wavelength of green light emitted by LED spotlights to interact with ultraviolet (UV) radiation. This unique combination of green light and UV radiation offers a range of benefits and applications in various industries.

In the medical field, the 525nm green light LED spotlight UV system can be used for the sterilization and disinfection of surgical instruments and hospital rooms. The green light penetrates deeply into surfaces, while the UV radiation destroys harmful microorganisms, ensuring a clean and safe environment for patients and medical staff.

In the agricultural sector, this UV system can be employed to promote plant growth and enhance photosynthesis. The green light stimulates chlorophyll production in plants, while the UV radiation activates specific plant hormones that enhance plant health and productivity. This technology can be used in greenhouses or outdoor fields to improve crop yields and quality.

Moreover, the 525nm green light LED spotlight UV system finds applications in the art and conservation fields. Green light is known to enhance certain pigments in artworks, making them more visible and vibrant. UV radiation, on the other hand, can be used to detect and identify hidden details or signatures on artworks, assisting conservators in their restoration efforts.

Additionally, this UV system can be used in forensic science to illuminate and enhance latent fingerprints or other forensic evidence. The green light helps to bring out fine details, while the UV radiation reacts with certain substances, making them visible to the naked eye.

In conclusion, the 525nm green light LED spotlight UV system offers a unique combination of green light and UV radiation, providing numerous benefits and applications across different industries. Its ability to penetrate surfaces, stimulate growth, enhance visibility, and destroy microorganisms makes it a valuable tool in various fields, including medical, agricultural, artistic, conservation, and forensic sciences.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

LED spot curing system is mainly used for UV glue, ink, varnish, paint, coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. LED spot curing light application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、LED lamp beads
LED Spot UV Curing Systems has the advantages such as high energy, strong light and long service life;

2、Single-band LED ultraviolet light source
common wavelengths of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UV LED Spot Curing System without heat radiation
LED spot curing system from Futansi using high power LED lamp beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
UV-LED Spot Curing System from Futansi, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
UVLED spot curing system through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV curing spot light from Futansi does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UVLED curing machine covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
UVLED emits ultraviolet light source through LED lamp beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi LED spot cure systems is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV led light source application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi led spot curing system are mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. Spot curing system application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

1、High power LED beads
Advantages of UV curing spot light such as high energy, strong light and long service life;

2、Single-wavelength LED Spot UV Curing Systems
LED spot cure systems common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UV LED Spot Curing System without heat radiation
UV-LED Spot Curing System using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with four channels uvled spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, effective costly;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, UV-LED Spot Curing Systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV-LED Spot Curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV LED curing spot lamp covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UV Spot Curing Systems through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi UV LED spot curing source is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV LED spot cure sources application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UV LED spot curing system with low heat radiation
LED spot cure system using high power LED beads, emitting 365/385/395/405nm single-output UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard with a four-head UV curing spot light, according to the actual use of the situation, choose 1-4 irradiation heads alone or synchronous work, effective costly;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, Spot UV irradiation systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
LED spot curing system does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
Spot UV curing system covers an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV light type, light weight, small physical strength, suitable for use in different working environments;;

8、Long service life
Spot curing system through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;